Varde Ovne Shape2 Soapstone

For more information on this stove please contact us direct on 028 4376 7021 /
078 0879 2256 or Click here to access our full contact information. For showroom directions, please view our Location Map page.

Stoves by Brand

Shape 2 with soapstone is the obvious choice, if you want to have heat long after you have stopped burning firewood.

The doors, top plate, grille, base and flue are all made in high-quality cast iron. Fitting options are flexible as the flue can be fitted either to the top or from the back of the stove. The door handle is produced so that it is cool to the touch.

The combustion chamber is ergonomically designed so that it is easy to light and clean. The air intake is elegantly located under the top plate and is easy to control to ensure optimal utilisation of the wood fuel.

Shape features the exclusive Varde Ovne AirBox system, which ensures that the stove takes air in from the outside, rather than using air from inside the room. This solution is especially suitable for use in new and re-insulated houses.


Varde Ovne Shape2 Technical Data

  • 5 KW (3,5-6 KW) ≈ 30-105 m2
  • Flue gas data:4,8g/sek.304°C at 20°C, 12 pa.
  • Combustion chamber: (HxBxD): 33/46x27/29x28 cm
  • Smoke exit Ø15 cm
  • Height for installation top: 96 cm
  • Height for installation rear: 87 cm
  • Distance to non-flammable products: 5-10 cm
  • Distance to flammable products: From behind = 10 cm
  • From the side= 25 cm

  • Height: 105 cm
  • Width: 52 cm
  • Depth: 41 cm
  • Weight: 185 kg

  • Accessories / Options:
  • Soapstone top (5 cm open or closed)
  • Connection pipe to AIR-BOX
  • Available in following colours - Black or Grey


  • Varde Ovne Shape 2 Soapstone Manual

Visit our Woodstove Showroom Today!

Our friendly sales staff can advise on stove size, type and output.